MAP:Cantilever Beam

The Cantilever Beam lab has been a foundation of EGR 103 for several years. It demonstrates how to initialize the workspace, load and manipulate data, perform calculations, generate values of a model equation, plot data and model values, and save plots. Not bad for the second week of an introductory course in computational methods! For at least the short-term, the Cantilever Beam lab will live on in MATLAB and in Python. Since the lab itself actually develops the final code, it is acceptable to post it here. Here's what the lab's solution looks like in MATLAB and in Python 3:

MATLAB

%% Initialize the workspace
% Clear all variables
clear
% Change display to short exponential format
format short e

%% Load and manipulate the data
% Load data from Cantilever.dat
beam_data = load('Cantilever.dat')
% Copy data from each column into new variables
mass  = beam_data(:,1);
displ = beam_data(:,2);
% Convert mass to a force measurement
force = mass*9.81;
% Convert displacement in inches to meters
displ = (displ*2.54)/100;

%% Perform calculations
% Use polyfit to find first-order fit polynomials
P = polyfit(force, displ, 1)

%% Generate predictions
% Create 100 representational force values
force_model = linspace(min(force),max(force),100);
% Calculate Displacement predictions
disp_model = polyval(P, force_model);

%% Generate and save plots
% Bring up a figure window
figure(1)
% Clear the figure window
clf
% Plot Displacement as a function of Force
plot(force, displ, 'ko')
% Turn hold on, plot the model values, and turn hold off
hold on
plot(force_model, disp_model, 'k-')
hold off
% Turn the grid on
grid on
% Label and title the graph
xlabel('Force (Newtons)')
ylabel('Displacement (meters)')
title('Displacement vs. Force for Cantilever.dat (NetID)')
% Save the graph to PostScript and PDF
print -deps RunCanPlot
print -dpdf RunCanPlot

Python

More Pythonic

# %% Import modules
import numpy as np
import matplotlib.pyplot as plt

# %% Load and manipulate the data
# Load data from Cantilever.dat
beam_data = np.loadtxt('cantilever.dat')
# Copy data from each column into new variables
mass  = beam_data[:, 0].copy()
displ = beam_data[:, 1].copy()
# Convert mass to a force measurement
force = mass * 9.81
# Convert displace in inches to meters
displ = (displ * 2.54) / 100.0

# %% Perform calculations
# Use polyfit to find first-order fit polynomials
p = np.polyfit(force, displ, 1)

# %% Generate predictions
# Create 100 representational Force values
force_model = np.linspace(min(force), max(force), 100)
# Calculate Displacement predictions
disp_model = np.polyval(p, force_model)

# %% Generate and save plots
# Bring up a figure window
fig, ax = plt.subplots(1, num=1, clear=True)
# Plot Displacement as a function of Force
ax.plot(force, displ, 'ko')
# Plot the model values
ax.plot(force_model, disp_model, 'k-')
# Turn the grid on
ax.grid()
# Label and title the graph
ax.set(xlabel='Force (Newtons)',
       ylabel='Displacement (meters)',
       title='Displacement vs. Force for Cantilever.dat (NetID)')
# Save the graph to PostScript and PDF
fig.savefig('RunCanPlot.eps')
fig.savefig('RunCanPlot.pdf')

More MATLABic

# %% Import modules
import numpy as np
import matplotlib.pyplot as plt

# %% Load and manipulate the data
# Load data from Cantilever.dat
beam_data = np.loadtxt('Cantilever.dat')
# Copy data from each column into new variables
mass  = beam_data[:, 0].copy()
displ = beam_data[:, 1].copy()
# Convert mass to a force measurement
force = mass * 9.81
# Convert displace in inches to meters
displ = (displ * 2.54) / 100.0

# %% Perform calculations
# Use polyfit to find first-order fit polynomials
p = np.polyfit(force, displ, 1)

# %% Generate predictions
# Create 100 representational Force values
force_model = np.linspace(min(force), max(force), 100)
# Calculate Displacement predictions
disp_model = np.polyval(p, force_model)

# %% Generate and save plots
# Bring up a figure window
plt.figure(1)
# Clear the figure window
plt.clf()
# Plot Displacement as a function of Force
plt.plot(force, displ, 'ko')
# Plot the model values
plt.plot(force_model, disp_model, 'k-')
# Turn the grid on
plt.grid()
# Label and title the graph
plt.xlabel('Force (Newtons)')
plt.ylabel('Displacement (meters)')
plt.title('Displacement vs. Force for Cantilever.dat (NetID)')
# Save the graph to PostScript and PDF
plt.savefig('RunCanPlot.eps')
plt.savefig('RunCanPlot.pdf')