EGR 224/Concept List/S23

From PrattWiki
Revision as of 02:52, 9 February 2023 by DukeEgr93 (talk | contribs)
Jump to navigation Jump to search

The notes below are not meant to be comprehensive but rather to capture the general topics of covered during lectures in EGR 224 for Spring 2023. These notes are in no way a replacement for actively attending class.

Lecture 1 - 1/11 - Course Introduction, Nomenclature

  • Main web page at http://classes.pratt.duke.edu/EGR224S23/
  • Circuit terms (Element, Circuit, Path, Branch and Essential Branch, Node and Essential Node, Loop and Mesh).
  • Accounting:
    • # of Elements * 2 = total number of voltages and currents that need to be found using brute force method
    • # of Essential Branches = number of possibly-different currents that can be measured
    • # of Meshes = number of independent currents in the circuit (or generally Elements - Nodes + 1 for planar and non-planar circuits)
    • # of Nodes - 1 = number of independent voltage drops in the circuit

Lecture 2 - 1/13 - Electrical Quantities

  • Electrical quantities (charge, current, voltage, power)
  • Passive and Active Sign Convention

Lecture 3 - 1/20 - Voltage and Current; Power and Energy

  • Power redux
  • Passive Sign Convention and Active Sign Convention and relation to calculating power absorbed and/or power delivered.
  • Kirchhoff's Laws
  • Example of how to find $$i$$, $$v$$, and $$p_{\mathrm{abs}}$$ using conservation equations
  • $$i$$-$$v$$ relationships of various elements (ideal independent voltage source, ideal independent current source, short circuit, open circuit, switch)

Lecture 4 - 1/23 - Equivalents

  • $$i$$-$$v$$ relationship for resistors; resistance and conductance
  • $$i$$-$$v$$ for dependent (controlled) sources (VCVS, VCCS, CCVS, CCCS)
  • Combining voltage sources in series; ability to move series items
  • Combining current sources in parallel; ability to move parallel items
  • Equivalent resistances

Lecture 5 - 1/27 - Voltage Division and Current Division

  • Delta-Wye equivalencies (mainly refer to book)
  • Voltage Division
  • Current Division

Lecture 6 - 1/30 - Node Voltage Method

  • NVM
    • Examples in Resources / HW Support / HW 03 folder on Sakai

Lecture 7 - 2/3 - Mesh and Branch Current Method

  • BCM and MCM
    • Examples in Resources / HW Support / HW 03 folder on Sakai

Lecture 8 - 2/6 - Linearity and Superposition

  • Definition of a linear system
  • Examples of nonlinear systems and linear systems
    • Nonlinear system examples (additive constants, powers other than 1, trig):
$$\begin{align*} y(t)&=x(t)+1\\ y(t)&=(x(t))^n, n\neq 1\\ y(t)&=\cos(x(t)) \end{align*} $$
    • Linear system examples (multiplicative constants, derivatives, integrals):
$$\begin{align*} y(t)&=ax(t)\\ y(t)&=\frac{d^nx(t)}{dt^n}\\ y(t)&=\int x(\tau)~d\tau \end{align*} $$
  • Superposition
    • Redraw the circuit as many times as needed to focus on each independent source individually
    • If there are dependent sources, you must keep them activated and solve for measurements each time

Lecture 9 - 2/104 - Thévenin and Norton Equivalent Circuits

  • Thévenin and Norton Equivalents
  • Circuits with independent sources, dependent sources, and resistances can be reduced to a single source and resistance from the perspective of any two nodes
  • Equivalents are electrically indistinguishable from one another
  • Several ways to solve:
    • If there are only independent sources, turn independent sources off and find $$R_{eq}$$ between terminals of interest to get $$R_{T}$$. Then find $$v_{oc}=v_{T}$$ and recall that $$v_T=R_Ti_N$$
    • If there are both independent sources and dependent sources, solve for $$v_{oc}=v_T$$ first, then put a short circuit between the terminals and solve for $$i_{sc}=i_N$$. Recall that $$v_T=R_Ti_N$$
    • If there are only dependent sources, you have to activate the circuit with an external source.

-->

Lecture 10 - 2/7 - Capacitors and Inductors

  • Intro to capacitors and inductors
  • Basic physical models
  • Basic electrical models
  • Energy storage
  • Continuity requirements
  • DCSS equivalents

Lecture 11 - 2/11 - First-Order Circuits (constant forcing functions)

  • First-order switched circuits with constant forcing functions
  • Sketching basic exponential decays
  • Using Node Voltage Method to get model equation

Lecture 12 - 2/14 - More First-Order Circuits

Lecture 13 - 2/18 - AC Steady State

  • Solving ACSS using just trig gets complex very quickly - we will use complex analysis to simplify the process
  • At the heart of complex analysis is an understanding of Complex Numbers

Lecture 14 - 2/21 - Test 1

Lecture 15 - 2/25 - Phasors 1

Lecture 16 - 2/28 - Phasors 2

  • EGR_224/Spring_2022/Sandbox
  • Motivation for phasors
  • Reminder: a phasor is a complex number whose magnitude represents the amplitude of a single frequency sinusoid and whose angle represents the phase of a single frequency sinusoid
  • Impedance: a ratio of phasors (though not a phasor itself)
    • $$\mathbb{Z}_R=R$$
    • $$\mathbb{Z}_L=j\omega L$$
    • $$\mathbb{Z}_R=\frac{1}{j\omega C}$$
  • Conservation laws (KCL, KVL), methods derived from conservation laws (NVM, MCM, BCM), and methods derived from Ohm's Law (voltage division, current division) apply in the phasor domain

Lecture 17 - 3/4 -

  • Transfer function: ratio of an output phasor (for a voltage or current) to a input phasor (for a voltage or current)
    • A transfer function is not a phasor - a transfer function does not represent a magnitude and phase of a single frequency sinusoid; instead, the magnitude represents a ratio of amplitudes for the output and the input while the angle represents the phase difference between the output and the input.
  • Filters
    • Low-pass, High-pass, Band-pass, Band-reject; names based on which frequencies of the transfer function have magnitudes that are 70.71% ($$1/\sqrt{2}$$) or more of the maximum possible magnitude
    • Cutoff frequency is where the magnitude is at 70.71% of the maximum
  • Decibel - based on the base-10 logarithm of a power ratio, multiplied by 10 (to get the deci- part)
    • We are assuming power is related to voltage or current squared, and the log of a square is twice the log, so $$H_{dB}=20\,\log_{10}|\mathbb{H}(j\omega)|$$
  • Bode plots
    • Magnitude plot is $$20\,\log_{10}|\mathbb{H}(j\omega)|$$ versus $$\omega$$ with $$\omega$$ on a log scale
    • Angle plot is $$\angle \mathbb{H}(j\omega)$$ versus $$\omega$$ with $$\omega$$ on a log scale
  • Translation between decibels and magnitudes
    • 1 $$\leftrightarrow$$ 0 dB
    • 10 $$\leftrightarrow$$ 20 dB
    • 100 $$\leftrightarrow$$ 40 dB
    • 0.1 $$\leftrightarrow$$ -20 dB
    • 2 $$\leftrightarrow$$ $$\approx$$ 6 dB
    • 5 $$\leftrightarrow$$ $$\approx$$ 14 dB
    • 0.25=1/2/2 $$\leftrightarrow$$ 0-6-6 dB=-12 dB
    • 8=2*2*2=$$2^3$$ $$\leftrightarrow$$ 6+6+6 dB = 3 * 5 dB = 18 dB
    • $$\sqrt{2}$$=$$2^{1/2}$$ $$\leftrightarrow$$ $$\frac{1}{2}$$ 6 dB = 3 dB
  • 3 dB below maximum for a transfer function amplitude is critical because that indicates where the half-power frequency is.
  • Four main terms in transfer functions:
    • $$\mathbb{H}(j\omega)=K\,\color{red}{(j\omega)^2}\,\color{green}{\Pi_k(j\omega+a_k)^{n_k}}\,\color{blue}{\Pi_l((j\omega)^2+2\zeta_l\omega_{n_l}+(\omega_{n_l})^2)^{m_l}}$$

-->